Recent Projects

  • +
    FLEX
  • +
    PP
  • +
    PLA 3D849
  • +
    PLA
  • +
    PETG
  • +
    HIPS
  • +
    CLEAN
  • +
    ABS H.I.
  • +
    ABS FIRE PROOF
  • +
    ABS
  • +
    Spray Powders
  • +
    Correction Pens

Contact

    Your Name (required)

    Your Email (required)

    Subject

    Your Message

    [recaptcha theme:dark]

    Metallic Part Cleaners

    By PCS 8 años ago

    Press-room Chemicals | | Metallic Part Cleaners

    DuraCHEMICALS

    Pressroom Chemicals

    DATA SHEET
    BUY ONLINE
    APPLICATION
    1. CPCMPCL: Cleaner and Lubricator for Delivery Chains
      All PressesTo clean and lubricate the delivery chains on all presses, will leave the delivery chains cleaned and well lubricated.
    2. CPCMPTC: Heavy Duty Cleaner For All Hard Surfaces
      Heavy duty cleaner to be used in the pressroom on all hard surfaces, especially suited to use on the dirty back & impression cylinders.
    3. CPCMPIR: Ink and Oxide Remover for Impression Cylinders & Cutt ables
      Designed to reduce/ eliminate the unwanted accumulation of ink of the impression cylinder.
      It will help prevent picking and piling problems associated with heavy coverage 2-sided jobs.
      On paper cutter beds / tables it removes all the oxidation, leaving a slick surface to slide paper over, can also be used on all bindery equipment such as paper folder, book-binders, and stitchers.
    ADVANTAGES
    1. CPCMPCL: Cleaner and Lubricator for Delivery Chains -All Presses
      Quick cleaning of delivery chains removing all accumulated dirt on the chains.
      Applies lubrication as it cleans, leaving chains running smooth.
      Easy trigger spray application.
    2. CPCMPTC: Heavy Duty Cleaner For All Hard Surfaces
      Cleans the dirtiest impression cylinder.
      Pleasant citrus odour with good ink solvency for fast ink removal and cleaning.
      Cleans wet or damp aqueous coating & ink from side frames.
      Removes water-soluble materials, paper debris, spray powder, gum etc.
    3. CPCMPIR: Ink and Oxide Remover for Impression Cylinders & Cutt ables
      Reduces ink piling on perfecting and impression cylinders.
      Effective longer than silicone or waxes.
      For use on paper cutter tables and joggers, bindery equipment and presses.
      Reduces ink picking during back up.
      Easily applied.
    RECOMMENDATIONS FOR USE
    1. CPCMPCL: Cleaner and Lubricator for Delivery Chains -All Presses
      Run the press at a speed of about 1000 impressioms per hour, apply CPCMPCL to the entire the chain, increase the press speed to 6000 impressions per hour.
      Accumulated dirt should now start to fall of the chain onto the floor.
    2. CPCMPTC: Heavy Duty Cleaner For All Hard Surfaces
      To clean impression cylinders and press side frames of ink or coating, apply with a shop towel, sponge or the supplied trigger spray, allows to loosen up the dirt and then remove by wiping off with shop towel.
      Can be diluted with water if required.
    3. CPCMPIR: Ink and Oxide Remover for Impression Cylinders & Cuttables
      On impression cylinders: Using a clean shop towel, apply an even layer onto a clean, dry impression cylinder.
      Allow paste to dry to a haze (5 mins.), then dust off with clean shop towel.
      It may be necessary to repeat if the cylinder is extremely dull or has pitted surface.
      On cutter beds and joggers: Wipe all dust and build-up from surface to be treated.
      Apply an even layer and allows paste to dry to a haze (app, 5minutes), dust off with a clean shop towel.
      On the initial application once the old oxidation has been removed, the cutter bed will be slick enough to slide paper over it.
      Regular use with keep the cutter table free from oxidation and the surface will remain in a slick condition.
    this work was shared 0 times
     100