Recent Projects

  • +
    FLEX
  • +
    PP
  • +
    PLA 3D849
  • +
    PLA
  • +
    PETG
  • +
    HIPS
  • +
    CLEAN
  • +
    ABS H.I.
  • +
    ABS FIRE PROOF
  • +
    ABS
  • +
    Spray Powders
  • +
    Correction Pens

Contact

    Your Name (required)

    Your Email (required)

    Subject

    Your Message

    [recaptcha theme:dark]

    Fountain Solution Additives

    By PCS 8 años ago

    Press-room Chemicals | | Fountain Solution Additives

    DuraCHEMICALS

    Pressroom Chemicals

    DATA SHEET
    BUY ONLINE
    APPLICATION
    1. CPCFSAEC: PH Water Control
      CPCFSAEC suspends build-up of calcium within the fountain solution, allowing you to produce sharp, clean halftones, reverses, and screens.
      It also runs metallic inks with the easy of conventional inks, reduces water settings, prints dense solids, and helps to eliminate ghosting.
      CPCFSAEC stops scratches, scum, and oxidation before they occur and removes them if they do occur.
    2. CPCFSAMS: Mould and Fungus Killer
      Used to kill mould and fungus growing in the water circulation tanks and water pipes.
    3. CPCFSASC: Press Circulating System Cleaner
      Designed to clean and remove ink, paper coatings, mould and calcium from the press circulating system.
      This ensures consistent quality and longer life of the fountain solution.
      Provided in powder form.
    ADVANTAGES
    1. CPCFSAEC: PH Water Control
      Suspends build-up of calcium within the fountain solution.
      Keeps reverses razor sharp and fine screens clean.
      Cleans and desensitizes the plate on every revolution of the plate cylinder.
      Stop scratches, scum and oxidation.
    2. CPCFSAMS: Mould and Fungus Killer
      Will kill and eliminate all mould and fungus growing in water circulation systems.
      Will kill and eliminate mould and fungus from water pans.
      Will not affect fountain solution performance.
      Economic to use.
      Will not affect PS plates.
    3. CPCFSASC: Press Circulating System Cleaner
      Cleans the entire circulation system including hoses.
      No need to drain dirty fountain solution.
      No hot water is required.
      Helps to keep fountain solution consistent.
      No listed hazardous materials.
    RECOMMENDATIONS FOR USE
    1. CPCFSAEC: PH Water Control
      Dosage: 0.8 per litre of mixed fountain solution.
      If necessary increase up to 1.6% of volume in water circulation system.
    2. CPCFSAMS: Mould and Fungus Killer
      Add 25 ml. of CPCFSAMS to every 25 litres of water circulation system water capacity.
      If your water circulation system holds 100 litres of water, add 100ml.
      If a small residue of mould and fungus persists, repeat treatment, and the mould and fungus problems should be gone.
    3. CPCFSASC: Press Circulating System Cleaner
      This product is presented in two separate bottles (A and B) powder inside.
      Fill both bottles with tap water in its entirety.
      Subsequently, add the contents of the bottle “A” to the dirty water tank the and flush the mixture about 30 minutes.
      Then add the contents of the bottle “B” also to the dirty water tank and flush the mixture about 15 minutes. After those 45 minutes, empty the dirty water tank.
      Wash and rinse the tanks with a little clean water for about 5 minutes.
      Once the circulation tank has been properly washed and drained, apply new fountain solution and printing resumes.
    this work was shared 0 times
     000